HongJin-M801 One-component moisture-curable silicone

Brief introduction

model	HongJin-M801
Specification	300ML/branch
characteristic	HongJin-M801 is a one-component moisture-curable elastic structural adhesive. Its main component is a special silane-modified polymer that cures by reacting with moisture in the atmosphere. This product is colorless and highly transparent in appearance, non-flowing paste. This product has good bonding properties to a variety of materials, including glass, metal, rubber, plastic, wood and inorganic materials, etc.
Applicable Products	Various electrical and electronic products, especially suitable for sealing, potting, insulating and waterproofing of connectors for automobiles and mobile phones.

Technical parameter

Attributes	Reference
type	Silane Modified Polymer
density（m/cm3）	1.5±0.10
hardness（Shaw BrothersA）	35±10
Dry time（min）	≤70
Shear strength（MPa）,7sky25℃/50%RH,AL/AL	≥0.8
Elongation（%）, 7sky25℃/50%RH	≥300
Operation time（After opening）	30minute

Precautions

1、Clean and dry the surface to be adhered to.

2、Squeeze the glue onto the cleaned and clean surface to make it evenly distributed, and then close and fix the surface to be adhered.

3、The thickness of the potting should not exceed 5mm as far as possible. The deeper the adhesive layer is, the longer the curing time is.

4、The speed of curing is related to temperature and humidity. High temperature and high humidity can promote moisture curing. It takes 7 days to fully cure.

5、It is recommended to store in a dry and cool place below 30°C.

Products

PRODUCT CENTER

About Us

Products

Application

Follow us