Brief introduction
| model | HongJin-UV5230 |
| Specification | 1KG/bottle |
| characteristic | HongJin-UV5230 is a high quality UV curing adhesive. The product can be rapidly cured in seconds under 365nm UV light irradiation, forming a high weather-resistant, high-strength bond |
| Applicable Products | It can be used for high-strength bonding of glass/glass, glass/aluminum products, glass cover/PCB, glass/plastic, etc. in the field of LED lamps |
Technical parameter
| Chroma | Transparent |
proportion（25℃） | 1.03 |
Viscosity（mpa.s） | 800~10000 |
Refractive index（25℃ | 1.48 |
Flash point（℃） | ≥90 |
Shear strength（MPa | 15.5 |
tensile stress（MPa） | 16 |
| Elongation at break（%） | 26 |
fracture stress（MPa | 15 |
hardness（ShaoD） | 65 |
transparency（% | 98 |
Precautions
Before applying glue, the surface to be bonded must be completely clean and dry. Determine the amount of glue applied as needed. Apply glue to one side of the material, close the other bonding surface, and squeeze hard to make the glue layer evenly distributed and remove air bubbles. Place it in a UV lamp. It can be positioned in a few seconds, and the maximum bonding strength can be achieved by continuing to irradiate. The higher the UV lamp intensity, the shorter the curing time.
Landline ：0755-28307837
Mail ：sales@szhjtec.com
contact ：吴先生 18688927121
王先生 13332958891
address ：深圳市龙岗区坪地街道教育北路49号5B栋501
Scan and pay attention to the public number
Copyright © 2020 深圳市宏进科技有限公司All Rights Reserved 粤ICP备20066503
Scan and pay attention to the public number